Post
Envoyer un message
eSUN 3D
Dec 07, 2022
|
Analysis of the Causes of 3D Printer Resin Cracking Problems
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
ingeniousnetsoft
Oct 08, 2021
|
Get the Best SEO Services India at Ingenious Netsoft at rates which are within your budget. We provide you with pocket-friendly SEO services that help to grow your business and save your money at the same time. We offer you high quality services with the help of a professional who looks after your website. Get in touch with us through our website https://www.ingeniousnetsoft.com/seo-services-india/
UnReality
Aug 13, 2018
|
#Isekai-Quest-After-School-Novela-esta bueno pero en manga uff mucho mejor xd
james
Feb 04, 2023
|
I am Charlie, working as a Manager in a renowned organization that provides the solutions for the HP Printer Offline issues. You just need to switch off your computer and printer and unplug all of their cords and connect everything back together after waiting 2 minutes and see if it helps get your HP Printer operating again. We provide the best assistance and help them in resolving the HP Printer offline issues.
https://www.hpprintersupportpro.com/blog/stop-my-hp-printer-from-going-offline/
https://www.hpprintersupportpro.com/blog/stop-my-hp-printer-from-going-offline/
2plus2four
Feb 08, 2023
|
What is 1.8 as a fraction?
The numeric value 1.8 as a fraction can be very easily solved.
Here is the solution:
= 1.8 as the fraction
= 1.8 by 1
= 18 by 10
= 9 by 5
Solving any numeric value to a fraction involves only 3 steps:
Step: 1 add 1 in the denominator along with similar no. of zeroes as the no. of digits present in numerator after decimal point.
Step: 2 divide the numbers with the same table
Step: 3 make the numerator and denominator to the simplest form.
The last number will be the answer.
URL - https://2plus2four.net/1-8-as-a-fraction/
The numeric value 1.8 as a fraction can be very easily solved.
Here is the solution:
= 1.8 as the fraction
= 1.8 by 1
= 18 by 10
= 9 by 5
Solving any numeric value to a fraction involves only 3 steps:
Step: 1 add 1 in the denominator along with similar no. of zeroes as the no. of digits present in numerator after decimal point.
Step: 2 divide the numbers with the same table
Step: 3 make the numerator and denominator to the simplest form.
The last number will be the answer.
URL - https://2plus2four.net/1-8-as-a-fraction/
V. ASENETH
Aug 22, 2018
|
#Osananajimi-to-Kiss-shitakunakunaiPor fin !!! que se quede con Chihiro el cambio por ella !! Ibuki es un cobarde ... Por favor que diga que si .. si dice que no dejaré este manga ÒnÓ ... (LITERAL) XD
UnReality
Aug 13, 2018
|
#Isekai-Quest-After-School-Novela-esta bueno pero en manga uff mucho mejor xd
UnReality
Aug 13, 2018
|
#Isekai-Quest-After-School-Novela-esta bueno pero en manga uff mucho mejor xd
UnReality
Aug 13, 2018
|
#Isekai-Quest-After-School-Novela-esta bueno pero en manga uff mucho mejor xd
Carebear Love
Aug 18, 2018
|
#OPAPAGOTOone surprise after another, my heart can't take it... I LOVE IT
Ali Hernandez
Aug 20, 2018
|
#Osananajimi-to-Kiss-shitakunakunaime cae mal la protagonista....quisiera que se diera cuenta de los sentimientos de chihiro o que ya no le de tantas vueltas al asunto cómo lo esta haciendo parece como si lo tratará de evitar 😞
roland americo santilan castro
Aug 12, 2018
|
#Unbalance-X2:-After-Storybueno me retracto men ... regresaste ah ser el orgulloso y serio prota de la primera tempo v: ...
andriiuz
Aug 20, 2018
|
#Osananajimi-to-Kiss-shitakunakunaidebería quedarse con shihiro de una vez ..es el que más se merece ser feliz..pero como las cosas terminara con ibuki mm va por esa línea creo 😳
Angie Choque Hamanccay
Aug 16, 2018
|
#Koyoi-Kimi-to-Kiss-no-Chigiri-wome gusto tanto, lastima que no sigan traduciendo solo se que han traducido hasta el 14 pero en portugues y eso lo encuentras en internet, de verdad es una lastima que lo abandonaran
Dark Unity
Jan 30, 2019
|
this lightnovel has keep me without sleep for a couple of times, and really deserves it, the Mc isn't dense, and have enough power to be ok but not op and sometimes he has tough situations were he have to be smart.
i love the fact that he thinks too much everything, the anime references and much more stuff.
it's a Isekai of a otaku man killed by truck-san, his personality of a reincarnated man is only keep for a few volumes, after that, he grows up and almost forget he is a reincarnated man, and his personality is more focus in his current life.
I've not finished it but until now I've not being disappointed, I'm at Volume 17 Currently, so idk what's waiting for me *xd*
⚜️ Mushoku Tensei ⚜️
i love the fact that he thinks too much everything, the anime references and much more stuff.
it's a Isekai of a otaku man killed by truck-san, his personality of a reincarnated man is only keep for a few volumes, after that, he grows up and almost forget he is a reincarnated man, and his personality is more focus in his current life.
I've not finished it but until now I've not being disappointed, I'm at Volume 17 Currently, so idk what's waiting for me *xd*
⚜️ Mushoku Tensei ⚜️
Rapport
Vous avez des problèmes ou des suggestions, n'hésitez pas à nous contacter.
|
Transmettre
Soumettre
@
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Les clubs
Charger la page précédente
Charger la page suivante
copains
Charger la page précédente
Charger la page suivante
|
Image
Youtube
Vidéo
Soumettre
|
Image
Youtube
Vidéo
Soumettre
*Le format de l'URL n'est pas valide, vérifiez et réessayez s'il vous plaît
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Les clubs
Charger la page précédente
Charger la page suivante
copains
Charger la page précédente
Charger la page suivante
|
Image
Youtube
Vidéo
Soumettre
Télécharger une video
Commencer à télécharger
*Le type de vidéo doit être MP4
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
|
|